Relationship Between Coal Powder and Its Combustibility

Coal‘s volatile component ,ash and fixed carbon content have different function in different stages of a combustion process,but the traditional coal classification can precisely show its combustion property.In this experiment coal‘s evaluation indeves(ignition index Di),(burn off index Df) were used to qualitatively show the ignition property and combustion ending property of coal samples.Meanwhile,considering actual heating circumstances in calciner(in cement plants),this thesis established the relationship among the ignition index,burn off index and coal‘s industrial analysis value,which makes it possible for the user to predict the quality of coal before using it and is very valuable in practice.     

Design and characterisation of a close-concentric annular reactor for kinetic studies at high temperatures

A novel annular reactor for kinetic studies at high temperature and flow conditions has been designed to keep eccentricity tolerances below 10%. In a previous work, we have shown that it is very important to keep such low eccentricity values in order to collect reliable kinetic data from this type of reactors. As proposed in this study, a modified reactor with the use of a spacer could guarantee an annular duct with low levels of eccentricity. Manufacturing tolerances or deformation effects giving rise to eccentricity can be significantly minimised when using this apparatus. The reactor has been both experimentally and theoretically characterised. Carbon monoxide oxidation was used as a model reaction under mass-transfer limited conditions revealing an eccentricity of ∼5%. With such small eccentricity levels, a concentric annular form can be assumed in the reactor analysis. Simple 1D or 2D models can therefore be inexpensively used in the evaluation of the kinetic data. Also, prior to the design of the annular reactor, a numerical investigation was carried out to clarify the effects of eccentricity, physical properties of the carrier gas and the annular aspect ratio on mass-transfer limitations. Contrary to expectations, a considerable increase in the fuel mass-diffusivity by carrier gas substitution did not change the mass-transfer rates for cases when eccentricity and aspect ratios were high.     

方波信号在音频技术中的应用

本文重点介绍了方波依赖在音频测量，设备的维护检测及录音均衡自动调节等音频技术中的应用，并通过对方波信号的频谱特性和方波信号通过线性系统的频域特性的分析，简要说明了方波信号在应用电路中的基本工作原理。     

多缝式烧嘴点火器在攀钢烧结生产中的应用

多缝式烧嘴点火器具有燃烧效率高，火焰长度易调，炉膛温度分布合理等优点，经工业试验证明，该点火器能满足攀钢烧结点火工艺要求，并有明显节能效果。     

Change of characteristics of desulfurization and denitrification by combustion flue gas composition and electrode configuration under pulsed corona discharge

Laboratory-scale and parametric experiments of SO₂ and NO_x removal from the simulated combustion gas by pulsed corona discharge have been performed by changing the combustion gas composition and temperature, the electrode configuration of plasma reactor, and the polarity of high-voltage electrode. The following results are obtained: 1) the higher the concentration of H₂O and O₂, the higher the efficiency of desulfurization and denitrification at the same specific input; 2) the pulsed corona discharge with a voltage pulsewidth as short as 200 ns of negative polarity shows the possibility to attain almost 90 percent deSO_x and deNO_x efficiency at the specific discharge input of 20 J/g, which is almost the same as the specific input in the electron-beam process; 3) the deNO_x characteristics show a little temperature dependence in the range of 70 to 130°C, but the deSO_x efficiency increases rapidly in the temperature region below 100°C suggesting the thermochemical dependence of deSO_x reaction; 4) when desulfurization and denitrification proceed, the white dendritic powder deposits on the plasma reactor whose composition is identified to be 49 mol% (NH₄)₂SO₄ and 47 mol% of 2NH₄NO₃ · (NH₄)₂SO₄, and the ratio of SO₂, NO and NH₃ of the deposit is almost equal to that of supplied gas.     

家电产品常用板材的选用

本文首先介绍国内和日本、德国、俄罗斯等国冷轧薄钢板及镀锌薄钢板的牌号、标记识别及生产地及与我国家标准薄钢板牌号的相互之间的关系，并比较具体地介绍冷轧板的实效性、镀锌薄钢板的锌层特性等诸多方面的状况。从而帮助我们在设计、制造家电产品中，比较正确地选择合适的板材。     

非AWGN环境下调制类型自动识别

在非AWGN环境下，针对CW，AM，FM，OOK，PSK，QPSK，16QAM，FSK，MSK，SSB十种混合调制信号，对调制类型特征提取方法和自动识别算法进行了分析、综合、设计和计算机仿真。提出了梯层电平分析方法、频率瞬时信号分析、剔除载波的归一化能量分析、平方后信号的频谱分析、四次方后的信号频谱分析等方法。当SNR=10dB时，计算机仿真结果是正确识别率不低于95％，自动识别的平均处理时间为不超过10s。     

洁净型煤技术开发研制

通过对洁净型煤技术的介绍，并对型煤质量及燃烧测试分析，认为洁净型煤技术是一种煤的高效洁净燃烧、改善环境空气质量及节约能源的有效技术。     

川东北三叠系飞仙关组鲕滩气藏有利储集层的形成与分布

川东北地区三叠系飞仙关组鲕滩气藏是近年四川盆地碳酸盐岩天然气勘探取得重大突破的领域，目前在中国石油探区内已发现罗家寨、渡口河、铁山坡等大中型气藏。对鲕滩气藏白云岩储集层进行岩心观察、显微薄片分析，并进行微量元素、流体包裹体、X衍射、阴极发光及电子探针等分析，结果表明，白云岩化和多期溶蚀是形成优质白云岩储集层的关键因素，混合云化与埋藏云化的叠加作用是形成孔隙性白云岩储集层的基本条件。飞仙关组鲕滩气藏储集层经历了4期溶蚀作用，即同生期溶蚀作用、浅埋期溶蚀作用、深埋期溶蚀作用和抬升期溶蚀作用，形成优质白云岩储集层的主要溶蚀作用是浅埋期和深埋期的溶蚀作用。优质白云岩储集层主要分布在台缘鲕粒滩相带，纵向与亮晶鲕粒灰岩呈韵律性互层，横向主要分布在鲕粒滩坝靠近漏湖-潮坪一侧。     

基于晶体双折射的光学FIR滤波器设计

提出建立在晶体双折射基础上，由晶体延迟片堆组成的光学FIR（Finite Impulse Response)滤波器设计方法，用以实现任意形状光谱输出。从FIR信号理论出发，建立了光学FIR滤波器数学模型，并分析了它与FIR滤波器的映射关系。在给出“输出反向传递法”来完成其光学实现同时，还以G／M滤波器设计实例证明其优良的光谱特性及角度特性。